Products
6 points crank supporting
Bushings and bearings are applied to resist deflection and reduce stress. Hydro-dynamic bushings help to reduce friction therefore shaft can move smoothly.
Slide guiding system
Dual plungers isolate slide from front-to-rear movement of con rods. Hydro-static bushings help to keep exceptional parallelism accuracy.
Shut height adjustment
Shut height adjusts up to 10mm by changing bolster height manually.
Temperature control system
Oil temperature stabilized during stamping. The heating system maintains the press frame temperature while the machine stops for troubleshooting.
Slide quick lifting
The quick lift feature raises the slide up 70mm to clear die problems and the slide returns to the original shut height after troubleshooting.
B.D.C. compensation system
B.D.C. compensate feature is available to adjust shut height according to die loading variation.
PERFORMANCE

Overall Clearance
< 0.45 mm
< 0.45 mm

Vertical Accuracy
< 0.005 mm
< 0.005 mm

Parallelism Accuracy
< 0.04 mm/m
< 0.04 mm/m
CONTROL

Main Page

Pressure Monitor (Option)

Service Log

Temperature Monitor (Option)

Trouble Shooting

Die Information

Alarm Records

Job Order

Load Monitor
OPTION

DownstackerDF-4
Shell diameter to 209
Feeding speed same as press
Oil free device

Tabbing FeederFDG-120
Strip width
~120mm
Strip thickness
~2.0mm
Feeding length
20 - 50mm

Belt TransferFDF-250
Max speed
700rpm
Index
6
Accuracy
±30sec
SPECIFICATION
Model | H125-Canning | H160 | |
---|---|---|---|
Capacity | ton | 125 | 160 |
Stroke | mm | 40 | 40 |
Max speed | spm | 700 | 500 |
Bed area | mm | 1400 x 1000 | 1800 x 1100 |